Sterilisation Pouch provide storage for sterile goods. Sterilisation Pouchs, like Sterilization bags and Sterilization foil, award a long shelf life for the sterile items and are equipped with a Coloured Indicator Tape that displays successful sterilization via a colour change. The sterilization foils are normally found on rolls and can be cut as need, which provides economic advantages. Bag sealers seal the instruments in packaging to prevent subsequent contamination. We also offer self-adhering sterilization bags in our assortment, so that the use of bag sealers or tape is unnecessary. All packaging is available in various sizes so that you can find the proper sterilization packaging to meet your requirements.
Sterilisation Pouch,Sterilization Pouches,Autoclave Pouches,Autoclave Bags NINGBO YINGMED MEDICAL INSTRUMENTS CO.,LTD , https://www.chinayingmed.com
2. High alloy wear hammer. The hammer hammer handle is used in combination, only the hammer head is replaced, and the hammer handle is not changed.
3. Unique shifting and gap-adjusting technology, the hammer head does not need to be repaired after wear, and the moving position is used repeatedly. A pair of hammer heads can be used with three hammers.
4. The crusher rotates in both directions. Through continuous two-way operation, it can evenly wear between the hammer and the broken tooth plate, reducing the frequency of stopping and replacing the wearing parts.
5. The uniform grain size is uniform, the crushing ratio is large, the output is high, the energy consumption is low, the material can be crushed more than 20 tons per hour, and the cost per ton of crushed coal slag does not exceed 1.8 yuan.
6. Suitable for fine crushing of brittle materials, no clogging, less dust and low noise.
7. Shorten the time that the material stays in the crushing chamber and improve the service life of the wearing parts.
8. Easy to install, greatly improving the freedom of equipment.
9. The inspection is quick and the side door on the upper side of the crusher can be opened openly, which makes the repair and repair of the crusher more convenient and convenient, and shortens the inspection time.
10. Electric-hydraulic operation, one person can easily complete the operation, maintenance, replacement parts, etc. of the machine.
Introduction to the performance characteristics of the bipolar pulverizer
1. This series of crusher is continuously crushed by two rotors. There is no sieve device. All kinds of wet slag can be broken. It can be broken up in water and can be broken at any time. There is no adhesive clogging. Only the material size is controlled. Adjust the gap between the broken hammers. The general crusher, because the material stays in the crushing chamber and cause blockage, which causes the related parts to intensify the wear. This series of crushers can avoid the above phenomenon.