My-G083 Syringe Pump (Double Channel) (without drug library)

My-G083 Syringe Pump (Double Channel) (without drug library)

Model NO.: MY-G083
Trademark: MAYA
Origin: China
My-G083 Syringe Pump (Double Channel) (without drug library)
My-G083 Syringe Pump (Double Channel) (without drug library)


Flow rate
50ml syringe:0.1~1500ml/h;
30ml syringe:0.1~900.0ml/h;
20ml syringe:0.1~600.0ml/h;
10ml syringe:0.1~300.0ml/h
The range of limiting volume
0~999.9ml

The range of injected volume
0~9999.9ml
Accuracy of flow rate
Within ±3%(Choose the syringe of specified manufacturer correctly. This accuracy of flow rate is not including the errors of syringe itself.)

Purge rate
Purge rate of 50ml syringe:1500ml/h;
Purge rate of 30ml syringe:900.0ml/h;
Purge rate of 20ml syringe:600.0ml/h;
Purge rate of 10ml syringe:300.0ml/h

Alarm and warms
The pump can give out alarming when injection soon finish, injection finishing, injection of limited amount finished, injection is blocked, syringe falls off, syringe is improperly installed, setting error, AC power has been pulled out, low battery and so on.  

Injection blocked
Choose in the three kinds of occlusion alarm pressure according to the clinical requirements(High,Medium,Low)
KVO rate
1ml/h

Fuse specification
F1AL/250V ,two fuses(installed inside pump)

Operating power
AC100~240.0V, 50/60Hz,  Power:≤30VA
Internal rechargeable battery: DC 11.1V,capacity≥1600mAh. The device could work constantly more than 4 hour at medium speed running mode, after the battery charged for 10 hours.
Operating environment
temperature:+5~+40°C,  relative humidity:20~90%
Storing environment
temperature:-30°C~+55, relative humidity:≤95%, ( No condensation state )
Atmospheric pressure
860hPa~1060hPa

Safety level
Class II with insulated enclosure, internal power supply, BF-type continuous normal running equipment.
IP grade
IPX1

Dimensions
280(L)×210(W)×130(H)(mm)

Weight
2.2kg

F1AL/250V ,two fuses(installed inside pump)
Operating power
AC100~240.0V, 50/60Hz,  Power:≤30VA
Internal rechargeable battery: DC 11.1V,capacity≥1600mAh. The device could work constantly more than 4 hour at medium speed running mode, after the battery charged for 10 hours.
Operating environment
temperature:+5~+40°C,  relative humidity:20~90%
Storing environment
temperature:-30°C~+55, relative humidity:≤95%, ( No condensation state )
Atmospheric pressure
860hPa~1060hPa
Safety level
Class II with insulated enclosure, internal power supply, BF-type continuous normal running equipment.
IP grade
IPX1

Dimensions
280(L)×210(W)×130(H)(mm)
Weight
2.2kg
 

Our Advantage :
1: For all your inquires about us or our products , we will reply you in detail within 24 hours.
2: We own professional team have professional attitude to recommend products and services.
3:One year free warranty , after it is still providing after-sales service .
4: We offer OEM services , Can print your own logo on the products .
5:We have very experienced engineers , can help you better use our products .


foot mask (2)

China Skin Peeling Foot Mask manufacturer, choose the high quality Foot Skin Mask, Beauty Skin Peeling Foot Mask, Skin Care Peeling Foot Mask, etc.

[Structure and composition]
Exfoliating foot membrane mainly by the essence of fluid, the composition of the foot protection film.
The main components
Rose oil, deionized water, hyaluronic acid, citric acid, ethanol, glycerol.
[Benefits]
Deep moisturizing and dry rough skin, soften the cuticle, to help the aging dead skin shedding effectively improve the foot skin dry, rough and so on,
Make feet more clean and fresh, healthy and energetic.

Skin Peeling Foot Mask

Skin Peeling Foot Mask,Foot Skin Mask,Beauty Skin Peeling Foot Mask,Skin Care Peeling Foot Mask

Hebei Houde Hanfang Medical Devices Co., LTD. , http://www.hodafhealth.com