FUXIBIO FFP2 Respirator manufactured by Careable Biotechnology Co.,Ltd Ffp2 Respirator Cup Shape, Ffp2 Face Mask,Ffp2 3D Mask,Ffp2 Mask Online CAREABLE BIOTECHNOLOGY CO,. LTD , https://www.careablemask.com
Second, the V-shaped branch adjustment The bottle is placed in the lower V-shaped branch, the two screws on the support block are loosened, and the bottle and the lower V-shaped block are moved together until the position of the capping head and the cap are aligned. , tighten the two screws on the V-block.
Third, the specific operation method 1, put the bottle filled with liquid and put the lid on the lower tray, leaning on the V-shaped branch, holding the bottle with one hand, the Other hand will pull the handle backwards, then the tray Lift the bottle up until the cap is pressed against the cap.
2. After the cap and the capping head are pressed, the caps of the three capping caps that are continuously rotated are rotated several times, and the cap is rolled tightly. (Note) The motor must run clockwise.
3. Push the handle forward so that the lid of the rolled cover returns to the original position with the tray, the whole operation process is completed, and the above operation can be repeated every time a bottle cap is rolled.
Fourth, the adjustment of the capping head The machine is equipped with a plurality of capping heads, which can be selected according to the size of different bottle caps. Try it out before using it in the bottle.
1. If the cover is not tightly rolled, the capping nut can be unscrewed and the upper capping head can be unscrewed in the counterclockwise direction, and then the upper fixing nut is locked.
2, the lid is rolled too tight, there is a phenomenon of rotating the cap. The upper capping lock nut can be unscrewed and screwed clockwise into the upper capping head, and then the upper retaining nut is locked.
3, the bottom of the bottle cap is not tight, the eccentricity of the three rolling heads can be adjusted according to the actual situation. If the collection is too tight, there is a phenomenon of crushing the bottle, and the eccentricity of the three rolling heads can be appropriately adjusted.
The company's main business: oral liquid filling and capping machine , oral liquid filling machine, oral liquid capping machine
Detailed description of the capping machine
First, the adjustment of the upper arm when rolling different specifications of the bottle This machine can be used to roll the bottle cover of 5-500ml. When using any bottle of the specification, just put the bottle of this specification on the tray, hold the cross arm with one hand, and Loosen the nut on the left side of the cross arm with one hand, and lower or raise the cross arm until the cap and cap are about 20 mm. Tighten the nut and use the hex wrench with the belt to hold the ring against the cross arm. Lock the bracket. (Note) Pay attention to the position of the cap and the cap when tightening.
Next Article
Fish pond stocking, disease prevention