Explosion Proof Solvent Recovery Machine
We occupy a quality position of the Explosion-proof Solvent Recovery Machine in the market place, solvent recovery machine is the layout of the factory, The solvent recovery machine output of our factory is the largest;
explosion-proof device for recovering solvent, solvent recovery apparatus and other products through the national explosion-proof inspection center Chinese verification, access to safe explosion-proof certification, so Calstar® brand can be assured.
Characteristics of explosion-proof solvent recovery machine Explosion Proof Solvent Recovery Machine,Blast Proof Recovery Unit,NMP Solvent Recovery Machine,Solvent Recycling Companies SHENZHEN KUANBAO ENVIRONMENTAL EQUIPMENT CO., LTD , https://www.calstarkb.com
3. If you need to scrape the groove wall material during operation, apply bamboo and wood tools, and do not use your hands to avoid accidents.
4. If you find that the machine vibration is abnormal or you find abnormal noise during use, you should stop the inspection immediately.
5. When disassembling and disassembling the slurry, it should be lightly disassembled, stabilized and lightly placed to avoid deformation damage.
6. The equipment should be cleaned and wiped clean after use every day.
1, the two stage heating setting: according to the composition of the mixed solvent to recycling, the heater temperature for two set, so that different boiling point solvents in accordance with the order from low temperature and high temperature distillation in batches, the start time to avoid too high temperature, resulting in low boiling boiling over solid component and pipeline obstruction by;
2, fan running time setting: after the machine is shut down, the fan can continue to operate for a period of time, in order to improve the safety of operation;
3, the operation is simple: do not need someone to operate, staff only need to feed, turn on the power, clean up the residue can be, the whole process of automatic recycling automatic shutdown; save human resources
4, after the recovery of solvent quality as new: because the device uses the distillation separation principle, do not add any chemical composition
5, model a variety of: your company can choose according to the actual amount of waste of different models of models
6, the cooling way: the use of air-cooled cooling principle to improve the cooling effect, shorten the recovery time, more energy saving and environmental protection,
6, automatic shutdown system: can be controlled by time or temperature
7, recovery tank can be dumped, easy to remove residue
8, double circulation cooling, environmental protection without pollution,
9, fixed temperature shutdown: solvent recovery is completed, according to the steam temperature automatic shutdown;
10, time off: according to the time, double shutdown protection function;
11, ultra high temperature protection: when the machine exceeds the set temperature, automatic stop heating system;
12, temperature display no contact, no electric spark;
13, the temperature is accurate: the digital setting display temperature, the minimum value is 0.1
Groove mixer operation and maintenance method
Operation specification and maintenance method of trough mixer 1. Before using the equipment, check whether the shaft seal part of the worm gear bearing is flexible and wearable. If the defect is repaired in time, it can be used. 2. Mixing and disassembling the slurry. Use special tools, do not knock, so as not to damage the parts, stir the pulp and take it when you press it, you should pay attention to it, do not hit hard, so as not to bend the shaft.
Next Article
Full-price feed four-to-four