Talking about the Management Measures of Cinnamon Seeds After Straw-free Fruiting Before Harvesting

From the time of colonization to root melon harvesting, cucumber roots grew, stems and leaves grew, and flowering sat melons. Production should be controlled through fertilizer and water management to ensure that the growth and rooting of stems and leaves, ensure that the melons are held, prevent leggy, flowering, roots and other problems, and coordinate the growth balance of the pods. After the planting, the microclimate in the solar greenhouse just satisfies the lower limit of cucumber growth. In order to promote the easing of seedlings, it should be sealed and kept warm. If conditions permit, small arch shelters or covered non-woven fabrics can be added for warming and heat preservation. Generally, during the period of gentle seedlings, the temperature requirement is 28 to 30°C during the day and 35°C or less; at night, 22 to 20°C and no less than 18 to 16°C. In sunny days, after appropriate “late exposing and early exposing” grasshoppers, after the exposing ceremony, when the room temperature began to rise, the awnings or non-woven fabrics were uncovered, and the light was increased and the ground temperature was increased. In the evening, cover a small arch shed and put grass rakes. Do not cover the mulch, need to cultivator loose soil 1 to 3 times, in order to increase the temperature and promote hair roots slow seedlings.

After easing the seedlings (4 to 6 days after planting), the seedlings were lightly irrigated and submerged under the film, and only the small ditch was not poured into the large ditch to prevent the ground temperature from significantly decreasing. If the soil moisture is good after easing the seedlings, the seedlings may not be irrigated so as to facilitate rapid temperature rise and hair roots. However, if the blind pursuit of rapid warming of the ground temperature does not give rise to water, the initial flowering period is prone to drought and water shortage, and it is difficult to manage. Because watering at the beginning of flowering, no matter how big the water or small water, it will cause the stems and leaves to be long, so it should be treated with caution. If the film is not buckled, the cultivating soil shall be ploughed after the water is poured to increase the temperature and keep the soil. Also appropriately reduce the temperature, especially the night temperature, in order to reduce respiratory consumption and prevent leggy. Generally, the temperature is controlled at 25 to 30°C during the day, 15 to 13°C at night, and not less than 10°C. If the temperature at noon exceeds 30°C and the air is released from the top, if there is no cold current, small sheds can be gradually scattered. After easing the seedlings, if the seedlings grow poorly and their yellowness is weak, the management temperature may be appropriately increased, and foliar may be sprayed with potassium dihydrogen phosphate plus love for agriculture or love, multi-payment, and green wind 95. It is not possible to apply quick-acting nitrogen fertilizer with slow seedlings to prevent madness.

After easing the seedlings, the cucumbers began to pump the main vines. In order to ensure their erect growth and their light-receiving postures are good, the vine should be promptly inserted. If the truss is not trussed in time, the main vine climbs up and then pulls the vine on the shelf, which is vulnerable to mechanical injury and breaks the petiole. After the seedlings are tempered, if they encounter unusual weather, they must buckle a small arch to protect them from cold. Cucumber racks are generally inserted into a single-row stand with a bamboo raft, and no bamboo racks are inserted. Each cucumber is inserted into a bamboo raft. Herringbone will make the stems and leaves of planting plants in the middle and late period dense, leggy, melons serious, single-row stand ventilation and light transmission performance is significantly better than the herringbone. Tied vines adopt the S-curve binding method. Compared with the straight-line binding method, the former can increase the position of the melon pods. It can also be considered that regulating the growth of plants and restraining the strengths and weaknesses make the greenhouse leading plants at a uniform level and easy to manage. The racks can also be suspended by plastic ropes or nylon nets, relying on tendrils wound on shelves, less shade than bamboo poles, but the tying of vines is cumbersome. When tying the vines, timely removal of tendrils, madness, male flowers, and too many dense female flowers to reduce unnecessary nutrient consumption.

Before the roots sit, management should be based on root control. The characteristics of sitting on the root melon: Melon grows more than 10 centimeters, and melons turn black. After sitting on the root melon, the melon form rapidly expands, and it should be determined whether or not to pour melon water (or root melon water) according to the lyrical condition and plant growth. If the sensation is good, the scorpion grows strong, can be postponed until root melon harvest before and after watering topdressing; if the soil moisture is poor or moderate, melon pods grow moderate or weak, should be timely root melon water, in order to promote the rapid expansion of root melons, In combination with root melon water, fast-acting fertilizers can be used, such as ammonium nitrate 20-30 kg per mu, or urea 10 kg per mu. Root melon water and fertilizer should not be large, base fertilizer less, can be combined with root melon water chase fine fertilizer. The method is to open the ditch on both sides of the seedling (not to cover the plastic film), topdressing a cooked cake or compound fertilizer, 150 kg of cake fertilizer per mu, or 20 to 30 kg of diammonium phosphate per mu, after application, mix well with the soil. .

NVR Security Camera Kits System

NVR WiFi cameras can be added to NVRs if they are in the same LAN. Here we'll guide you to finish this process following the steps below.Step 1: Connect the camera to your router via WiFi by configuring WiFi settings for the WiFi camera.
Step 2: Connect your PoE NVR to the LAN port of the router.Step 3: Open the monitor of your NVR, then select Channel Settings > IP channel. Check Auto Add and click Scan. Then the WiFi camera will show up in the list. Assign a channel for it if necessary.NVR WiFi cameras can be added to NVRs if they are in the same LAN. Here we'll guide you to finish this process following the steps below.Step 1: Connect the camera to your router via WiFi by configuring WiFi settings for the WiFi camera.
Step 2: Connect your PoE NVR to the LAN port of the router.Step 3: Open the monitor of your NVR, then select Channel Settings > IP channel. Check Auto Add and click Scan. Then the WiFi camera will show up in the list. Assign a channel for it if necessary.
NVR WiFi cameras can be added to NVRs if they are in the same LAN. Here we'll guide you to finish this process following the steps below.Step 1: Connect the camera to your router via WiFi by configuring WiFi settings for the WiFi camera.
Step 2: Connect your PoE NVR to the LAN port of the router.Step 3: Open the monitor of your NVR, then select Channel Settings > IP channel. Check Auto Add and click Scan. Then the WiFi camera will show up in the list. Assign a channel for it if necessary.
NVR WiFi cameras can be added to NVRs if they are in the same LAN. Here we'll guide you to finish this process following the steps below.Step 1: Connect the camera to your router via WiFi by configuring WiFi settings for the WiFi camera.
Step 2: Connect your PoE NVR to the LAN port of the router.Step 3: Open the monitor of your NVR, then select Channel Settings > IP channel. Check Auto Add and click Scan. Then the WiFi camera will show up in the list. Assign a channel for it if necessary.

NVR Security Camera Kits System,NVR WiFi cameras,Connect the camera,WiFi camera,PoE NVR to the LAN

Shenzhen Fuvision Electronics Co., Ltd. , https://www.outdoorsolarcameras.com