Wild ash tree flowers are more common in the altitude of 100-1400 meters, growing in the summer and autumn high temperature and rainy season, on the shady surface of broad-leaved forests such as eucalyptus and chestnut trees with weeds, generally growing in sandy soil. On the surface, there are burrs, rot leaves and other opaque objects. Grifola frondosa can grow at temperatures between 20 and 30 ° C, and the most suitable temperature is 24 to 27 ° C. So as long as the temperature and environment are suitable, the ash tree flowers can be cultivated. The ash tree flower has two management methods: imitation wild and bag-type mushroom. 1. The wild-type mushroom is made of wood chips as the medium. After the mycelium is overgrown with the bacteria bag, the plastic bag is removed from the outside. The rods are arranged neatly in the previously dug, and the bacteria sticks are kept properly. In the gap, fill the soil around the gap and cover the surface with almost 2 cm of soil. This method of soil cultivation is more efficient than bag type. 2, bag-type mushroom is to remove the primordial bag from the mushroom room, keep the temperature of 20 ~ 22 ° C, remove the tampon and ring around 5 days, stand upright on the bed frame, spray some water on the paper On the mouth of the bag, ventilate for 1 hour each time, 2 to 3 times a day. About 25 days or so, the whole mushroom can be picked and cut with a knife. Disclaimer: Some articles on this website are transferred from the Internet. If legal rights of third parties are involved, please inform this website. phone
Due to the irregular characteristics of the pelvic structure, the choice of internal fixation is diverse.
For patients separated symphysis pubis, a 2 or 4 holes, 4.5 or 3.5mm diameter dynamic compression plate or reconstruction plate can be used and fixed with full-thread cancellous bone screws.Another method of fixation is lag screw fixation. In patients with new sacroiliac joint dislocation with a forward approach,firm fixation can be achieved by using 2holes 3.5mm dynamic compression plates through the front of the sacroiliac joint. The posterior approach can also be used to insert 6.5mm lag screws into the sacral wings or hollow cancellous bone screws with interosseous compression for firm internal fixation. If available, the fracture may be fixed with 3.5mm or 4.5mm pelvic reconstruction plates and appropriate full-thread cancellous bone screws.
Pelvic Plate,pelvic fracture treatment,pelvic fracture,pelvis plate Jiangsu Aomed Ortho Medical Technology Co.,Ltd , https://www.aomedortho.com
When does the ash tree flower grow?