The Q Switch Nd: YAG laser energy output can be absorbed by blue and black pigment granules in organic tissues, and the pigment granules will be therefore swelled to break out, and become more tiny granules by fission to be excreted out of the human body or phagocytized by macrophages and then metabolized away by lymphatic system, so as to realize pigment removal.
Laser Tattoo Removal Treatment
Treatment with the q-switch nd yag laser tatoo removal varies from patient to patient depending on the age, size, and type of tattoo (amateur or professional). The color of the patient's skin, as well as the depth to which the tattoo pigment extends, will also affect the removal technique.
Nd Yag Laser for Tattoo Removal Machine, Laser Makeup Eyebrow Removal Beauty Machine, Cheap Tattoo Removal Laser Machine, Laser Tattoo Removal Equipment with Ce TUV Approval Zhejiang Lasy Science and Technology Co.,Ltd. , http://www.lasylaseripl.com
Nd Yag Laser For Tattoo Removal is an advanced treatment designed to completely eliminate tattoos, without leaving scars or unpigmented areas of skin behind.
During a laser tattoo removal treatment, the laser`s high energy light breaks up the tattoo ink into tiny particles, which are gradually absorbed by the skin. Laser tattoo removal may cause slight discomfort, though a local anesthetic can be used to eliminate the pain.
Following a laser tattoo removal treatment, minor side effects such as red and tender skin may occur; however, these tend to diminish within three to seven days.
Depending on the size and color of your tattoo, the number of treatments will vary. Your tattoo may be removed in two to four visits, though it may take as many as 10 more sessions. You should schedule a consultation, during which time a trained professional will evaluate your personal situation and advise you on the process.
Thanks to newer technology, laser tattoo removal has become much more effective with very little risk of scarring. Laser treatment is often safer than many traditional methods such as excision, dermabrasion or salabrasion (using moist gauze pads saturated with a salt solution to abrade the tattooed area) because of its unique ability to selectively treat pigment involved in the tattoo.
Seed bed and shed for flower cultivation
First, the seedbed for winter and early spring flowers sowing seedlings and cutting propagation. Where there is a power supply, electrothermal hotbeds can be used. Such hotbeds have many features and are now widely used. The size of the electrothermal hotbed depends on the rated power of the electric heating line, the local climate, the optimum temperature of the crop, and heat dissipation. There is an electric hotbed in the greenhouse. Generally, a 1000W electric heating line can be used to lay a 10m2 (10*1m) hotbed. When wiring, both sides are dense and the middle is thin to ensure that the seedbed temperature is even. Connect the heated electric wire to the output key on the adjustable transformer, and then connect the wire on the input key of the adjustable transformer to the input key of the 6301 relay. Put the substrate, such as locust, perlite, and peat on the insertion bed. Soil, etc., then insert the conductive thermometer into the matrix. In addition, if the desired temperature cannot be achieved, the bed can be covered with warmth. In the use of electric hotbeds should pay attention to check whether the hotline leakage, in order to ensure personal safety. Electrothermal hotbeds can be used not only for cuttings, but also for sowing seedlings. The second shady shed is an essential equipment for flower cultivation. Since most types of greenhouse flowers are negative and semi-negative plants, and are not tolerant of high temperatures in summer greenhouses, arbours need to be set up to facilitate summers; The annual production of flowers cannot be separated from the shade. There are many types and forms of arbours, which can be generally divided into permanent and temporary. Permanent shade sheds are used for greenhouse flower cultivation; temporary shade sheds are mostly used for open field breeding. Such as cultivation of azaleas, orchids and so on. In the case of rapid propagation of seedlings through tissue culture, temporary shade sheds are sometimes required. The flower greenhouses used in greenhouses are generally 2.0-2.5 meters high, and they are better for the convenience of day-to-day management. However, they are too expensive and use less materials. Temporary awnings mostly consist of wood, bamboo, etc.; permanent steel pipes, iron pipes, aluminum alloy pipes, or cement columns. The diameter of the metal pipe is preferably 3-5 cm, and its base should be fixed in the concrete. Scaffolding is covered with shading material. In the past, curtains, bamboo blinds, slats or straw curtains were used. The curtains and bamboo curtains are easy to roll and easy to operate, and appropriate shading can be provided according to the requirements of different flowers for shading. Slatted sheds are usually 5 cm wide and 1 cm thick, with a spacing of 5 cm. Fixed on the scaffold. Now, shade nets are used instead of past covering materials, and shade nets of different densities can be selected according to the degree of shade-tolerance of flowers, and the number of cover layers can also be increased if necessary. Its characteristics are light weight, durable, low cost and easy to lay. In order to achieve the effect of beautification or practicality, climbing plants such as grapes, gardenia, rose, snake grape, loofah, lentil, etc. can also be used as shade sheds according to local conditions. However, pay attention to sowing time or frequent sparse cuts to adjust shade avoidance. In order to avoid sunlight in the morning and afternoon from the east or both sides of the awning to the shade, the sun shade at both ends of the awning is always inclined, the lower edge of the shade should be more than 50 cm above the ground in order to facilitate ventilation. Shade width 6-7 meters, not too narrow, otherwise affect the shading effect. In the general shed, east-west extensions are used. The awnings used in the open-air cutting bed and seeding bed are often low and low, generally 50-100 cm in height, and are mostly temporary shaded sheds. Now covered with shade nets. Before the cuttings are not rooted, curtains, bamboo curtains, and straw curtains can be placed on the shade net. When the rooting begins, the covering material is slowly removed, and finally it is completely removed. Provision of temporary shading is favorable for land use and rotation. In summer, outdoor cultivating potted flowers, such as begonias and ferns, should be provided with shade sheds and spray equipment to form a moist and moist environment. The arbours used in greenhouse flowers should be located in a well-ventilated place near the greenhouse where there is no accumulation of water. Potted flowers should be placed on the flower stand or inverted on the flower pots, which is conducive to ventilation. If it is placed on the ground, paving the ground, the materials are: bricks, coarse sand or coal residue (need to be screened), which is conducive to drainage, and can also prevent splattering of foliage and flower pots when it rains, and can prevent diseases. occur.
Next Article
Talking about apple trees
Prev Article
How to plant a good spring corn